The multi-arm is positioned on the right side of the machine which means that there is a clear view in front of the machine in contrast to traditional mini loaders with a tower on the front end.
The center of rotation for the tool carrying multi-arm is at the back of the driver's seat which means that the arm only swings 33 cm forward, when it elevates from the lowest position. The small variationcauses the maximal lifting strength to fall by about 10 % from the lowest to highest position which is quite unique.
The multi-arm is equipped with hydraulic parallel lifting which is a big advantage when you are working with a shovel, pallet forks, and other equipment that should stay in a horizontal position.
On top of that, the Tool-Trac is fitted with a hydraulic quick-switch, so it is possible to switch between e.g. a shovel and pallet forks without leaving the driver's seat The multi-arm has a floating position for optimized leveling of gravel and so on.
Tool-Trac is articulated and has a turning radius of 65 cm and total width of 125 cm (105 with narrow tires). This makes Tool-Trac very suitable for e.g. narrow walking areas.
As a standard, the mini loader has a permanent four-wheel-drive with 60% - 40% lockbetween right and left side to avoid that the machine spins on one wheel even though the wheel elevates.
The low center of gravity of 64 cm and the stiff knuckle joint makes Tool-Trac a highly stable tool carrier and mini loader.
Comfort for the driver
The ergonomics on the Tool-Trac is of highest priority, and all functions are strategically placed within reach to ease the operation of the machine. The low entrance height of 40 cm secures a fast and unhindered access to the driver's seatThe driver is placed low and between the front wheel and
The driver is placed low and between the front and the the rear wheel which is the steadiest place on the machine. Therefore an optimal comfort is secured, even when driving on rough terrain. The low position allows a spacious cabin no matter the height of the driver.
Low noise level
Tool-Trac has a special exhaust silencer that reduces the exhaust noise. This makes it suitable for working in residential areas both during day and night times without disturbing the residents.
Tool-Trac is constructed with the operational reliability in focus, so it does not contain unnecessary electronics that can cause the unwarranted breakdowns of the machine because of loose connections.
The joystick of the machine has a direct connection to the valves and only one electrical valve for e.g. the hydraulic height of cutting, the fluctuation of the dozer blade and so on. Components of high quality are equal to increased operational reliability.
Tool-Trac is equipped with well known components like Rexroth hydraulic pumps and engines, Kubota diesel engine, Gates hydraulic hoses, and EMB hydraulic fittings with o-ring sealing.
The machine is corrosion protected at corrosion class C3. All metal elements are sandblasted, followed by a zink-based grounded powder and a topcoat of powder. The space in the chassis is afterwards corrosion protected for an prolonged lifespan.
- Stiff knuckle joint in the middle of the machine leads to no rocking motion from side to side.
- Make your employee independent of others.
- Avoid extra transport of extra machinery for a few tasks.
- Improve the working environment by avoiding heavy lifting.
- Large program of equipment which relieves the daily work.