​News from Timan

Four-star upgrade

​

November 2022

​

Our sweeping/suction system, the Tornado 400, has undergone a major update in both design and function. The upgraded system naturally also had to be PM10/2.5 tested. The results were unmistakable; top marks with four stars and an unprecedented pick-up rate of over 90%. So we've developed a solid sweep/suction system that both has high suction power and emits a minimum of micro-particles.

The Tornado 400 sweep/suction system has been part of the Timan product range since 2008. The system is available for our Tool-Trac, and can also be connected to mini loaders etc.

​

Fourth hall ready to be a part of Timan

​

December 2021

​

After months of preparation, we can finally start production of the Timan 3330 in the new hall. Due to increased demand for Timan 3330 in particular, we have expanded production with an additional hall to meet customer needs. It is with great pleasure and humility that we are now ready with the fourth hall - especially considering we started 16 years ago in a small garage in the village of Svingel.

​

​

​

​

Nice visit from our new dealer in Bulgaria

​

October 2021

​

Our new dealer at Multitechnik took the long trip from Bulgaria to Tim to visit the factory and get a thorough insight into our machine room. Over three days, we reviewed everything from the company's history and production facilities to the new Timan 3330 and our future visions.

​

We thank Multitechnik for a constructive visit.

​

​

​

New Combi Spreder CS-200 now also available for tractors

​

September 2021

​

Finally it is possible to connect the unique salt spreader, Timan CS-200, to your tractor.  The capacity has been increased compared to the Timan 3330-model, and the same smart features still apply to the tractor model: switching between disc spreader and drop spreader, adjusting the spreading width from 1 metre up to 6 metres, and adjusting the spreading rate - all directly from the driver's seat.

We've also produced a series of instructional videos for the tool, so you quickly feel at ease with the machine.

​

​

Tornado T1 Sweeping/Suction system for Timan 3330 gets top marks in Germany

​

November 2020

​

Earlier this year we went to Germany to have a PM 10 / 2.5 test of our sweeping/suction system. 

The result of the test was very satisfying, where we ended up getting a 4-star rating - top grade in the class.

In short, the purpose of such a test is to examine how many microparticles the sweeping/suction system blows out of the rear end.

New Timan 3330. Better for the environment and better for the operator

​

October 2020

​

The comfort of the machine is absolutely exceptional, where you will experience the lowest noise level on the market and the most comfortable cabin. The tool carrier runs on petrol and thus emits far fewer Nox gases than its predecessor. As always, you can use the tool carrier all year round thanks to the wide selection of attachments.

With the new combi spreader, your winter service has never been easier

Januar 2020

​

Timan will soon present a special combination of a disc spreader and a drop spreader. From the operator’s seat you control whether you want to spread or drop the salt/sand when you are working. We look very much forward to presenting the finished product to you. Keep an eye on our Facebook, Youtube and Timan.dk/en.

New production hall is put into operation

Januar 2020

​

The new production hall is ready for use and we are really looking forward to getting more space – 2.100 m2. In here, we will manufacture our RCs and we expect to get a generally better production flow.

200 units of RC-1000 are now sold

1.november 2019

​

Time for RC cake. Today we mark the sale of RC-1000 no. 200 which since its birth in 2014 has been a faithful part of our close family. Although everyone has made a huge effort to reach the milestone there should nevertheless be a special thanks to the great development work that Henning and Vagn have been responsible for and the solid and efficient assembly that Troels always guarantees. We look forward to delivering the next 200 machines to our customers!

Have & Landskab 2019 was once again a success

30. august 2019

​

Again this year ‘Have & Landskab’ was a really good experience where we got to talk to a lot of people and informed them what Timan can offer. We would like to thank the many people who made their way to our exhibition booth and we are already looking forward to next years ‘Maskiner under Broen’.

New Weed Brush for Timan 3400

​

We welcome a new attachment in our Timan 3400-family. The rotating brush removes weeds effectively without the use of pesticides and other environmentally harmfull materials. You get a tool with many applications. Choose freely between working on the left or the right side of the machine, freely choose between the direction of rotation, adjust the speed rotation, adjust the pressure on the brush, choose between different brush types. Watch the video of the weed brush in action here.

Budget 2019 reached ahead of time

​

We are happy in Timan today. The budget revenue has already been reached and therefore we celebrate with Danish “smørrebrød” for everyone who has made this possible. However, we do not slow and continue to work hard